Stardek 1
The premier pool deck coating. This system begins with dime to quarter sized beads of our acrylic cement sprayed across the surface then knocked down to achieve a stucco like texture. A solid color is applied with one of the 40 different colored sealers.     

Stardek 2
For a professional "three dimensional" look. First, the entire surface is base-coated with a colored acrylic/cement. A stencil or tape design is placed down and a topcoat is then spray applied to achieve the deep highs and lows of the pattern. Highlights can be added, and after drying, two coats of clear sealer is applied.
 

Stardek 3
This is our 'Stamped Concrete' alternative. The first two steps, ( base coat and stencil applied)  are the same as Stardek 2. After spraying the topcoat, a release agent is then applied and a texture is rolled onto the surface. After curing, the  stencil is removed and antique is added. Finally two coats of clear sealer is applied
. 

Overlay
Hand carved overlays are the ultimate in surface transformation. Following proper surface preparation a modified concrete is placed across the plain surface, then carved by hand and color added to create an extremely realistic stone, brick, tile, or custom design. These over lays can be used on virtually any horizontal or vertical surface, interior or exterior.


Starchip
This is a low maintenance, decorative flooring system commonly used in garages. It resembles a granite floor and protects against impact and abrasion.  A two part epoxy is applied to the floor with vinyl chips to give the floor its "granite" look. The floor is then covered with a clear sealer along with non-slip aggregate. Eight colors are available. The chips can be applied with 100% coverage or less.